Are you looking for the best natural gas powered generators from China? With so many top-notch factories to choose from, it can be overwhelming. In this article, we’ll compare the leading Chinese manufacturers of natural gas generators, helping you make an informed decision for your power needs. Let’s dive in and explore the best options available.

Natural Gas Generator Sets

Product Details: MPMC gas-powered generator sets feature high efficiency and low emissions in the 375 kWe – 4500 kWe electrical power range. They utilize natural gas, biogas, or other gases and are equipped with cutting-edge technology for combined heat and power (CHP) and combined heat, power, and cooling (CHPC) solutions. The generators use professional electronic control systems for precise control of operating conditions and have high power density. They can achieve full load in two stages when the load loading rate is greater than 50%, meeting the performance level of G3 generator sets. The generators are adaptable to various combustible gases and

feature advanced ignition systems and optimized combustion chamber designs for reliable ignition and reduced misfire rates.

Pros:
– High efficiency and low emissions
– Continuous, economical, and reliable power supply
– Advanced electronic control system for precise control
– High power density and strong transient performance
– Adaptable to various combustible gases
– Advanced ignition system and optimized combustion chamber design for reliable ig…
– Low gas consumption due to air fuel ratio closed-loop control and cylinder unifo…

Cons:
– Complex installation and maintenance requirements due to advanced technology
– Higher initial investment compared to traditional generators
– Dependence on gas supply infrastructure
– Potential for higher operating costs if gas prices are high

3412T Natural Gas Generator(1000KW) – Diesel Engine

Product Details: The 700kw natural gas generator set, model 700GF-JT, is produced by Jinan Diesel Engine Corporation. It features a 12-cylinder, V-type 60° angle engine (12V190ZLDK) with a cylinder bore of 190mm and piston stroke of 210mm. The generator has a rated power of 700KW, rated voltage of 400/480/6300/10500V, and a rated frequency of 50Hz. It operates at a rated speed of 1000r/min and has an electronic speed control. The generator is available in open type and soundproof containerized structures, with noise levels of ≤106dB and ≤80dB respectively. It has a generating efficiency of 38% and uses spark plug ignition with turbocharging

and intercooling[1][3].

Pros:
– High power output of 700KW, suitable for large-scale applications.
– Advanced technology including electronic speed control, turbocharging, and inter…
– Available in both open type and soundproof containerized structures to suit diff…
– Equipped with brushless alternators and automatic voltage regulation for stable…
– Compliant with various international certifications such as BV, ISO, CE, HSE, an…

Cons:
– High net weight of 14500kg (open type) and 20000kg (containerized type), which c…
– Significant overall dimensions, requiring substantial space for installation.
– Higher lubrication oil consumption compared to some other models, with ≤0.85g/KW…

408 Natural Gas Generator (400~500KW) – Diesel Engine

Product Details: The 700kw natural gas generator set, model 700GF-JT, is powered by a 12V190ZLDK engine. It features a 12-cylinder, V-type 60° arrangement, with a cylinder bore of 190mm and piston stroke of 210mm. The generator has a rated power of 700KW, rated voltage of 400/480/6300/10500V, and a rated frequency of 50Hz. It operates at 1000 r/min and has an automatic voltage regulation system. The generator is available in open type and soundproof containerized structures, with noise levels of ≤106dB and ≤80dB respectively. It has a generating efficiency of 38% and uses electronic speed control and brushless excitation. The overall dimensions are

5480×2100×2335 mm for the open type and 8930×2440×2900 mm for the containerized type, with net weights of 14500 kg and 20000 kg respectively[1][3].

Pros:
– High power output of 700KW, suitable for large-scale applications
– Advanced engine technology with turbocharging and intercooling, enhancing effici…
– Automatic voltage regulation and electronic speed control for stable operation
– Low lubrication oil consumption (≤0.85 g/KW.h) and high generating efficiency (3…
– Available in both open and soundproof containerized types to suit different envi…
– Equipped with safety and protection devices, and can be used for synchronizing r…

Cons:
– High net weight, which can complicate transportation and installation
– Significant overall dimensions, requiring substantial space for installation
– Higher noise levels for the open type (≤106dB), which may not be suitable for al…
– Complex maintenance requirements due to the advanced technology and components i…

gas generator-manufacture,factory,supplier from China

CNPC Gas Generators

China Gas Generator and Power Plant Manufacturers

Product Details: The gas generators and power plants offered by Repower Gas range from 300 kW to 5000 kW. The 1900GF-TK1 natural gas generating set, for example, is powered by the L20V190ZLT-2 gas engine and complies with National Standard ‘GB2820 General Specification for Industrial Frequency Diesel Generating Sets’ and IEC34-I rotary generator standard. These gensets are equipped with high-quality alternators and advanced control panels. They feature accurate voltage regulation, good dynamic performance, low voltage waveform distortion, high efficiency, compact structure, ease of maintenance, low speed, reliability, and long life operation. They can be used as normal and standby power in various applications

such as oil fields, factories, and resource development bases.

Pros:
– High power and high efficiency
– Advanced governor from American WOODWARD Company
– Electronic control technology and lean-burn strategy
– Accurate voltage regulating and good dynamic performance
– Low voltage waveform distortion
– Compact structure and easy to maintain
– Reliable and long life operation
– Cost-effective
– Service centers in South America and other countries
– CE, ISO standard compliance
– Advanced air-fuel ratio control technology and low pressure air intake
– Knock control technology and explosion pressure monitoring

Cons:
– Limited geographical service coverage for some models
– Specific fuel consumption requirements (≤9000 kJ/kW.h)
– Oil consumption requirements (≤0.3g/kW·h)
– Noise level at rated power (105 dB(A))
– Altitude limitations (≤1000m)

China gas power engine generator set manufacturer, supplier …

China Gas Generator & Diesel Generator factories

Product Details: Kingway gas generators, such as the 200KVA Cummins Engine Silent Natural Gas Generator Set, use gas as fuel and include 3 Phase Gas Generators, LNG, and LPG generator sets. Key specifications include: Genset Prime Power of 200KVA / 160KW, Cummins Engine with Kingway Gas Device, 4 Stroke, Water Cooled engine type, and alternators from Stamford, Leroy Somer, Mecc Alte, Marathon, or Kingway. The generators have a voltage regulation system using AVR, controllers from Deepsea, ComAp, Deif, or Smartgen, and a closed water-cooled cooling method. They are certified with CE, ISO, and ROHS standards and come with a 12-month warranty or

1000 working hours[1][3].

Pros:
– High performance with no fundamental difference in performance compared to origi…
– Customizable according to working and environmental conditions
– Strong technology for converting diesel engines to single or dual fuel gas engin…
– Option for Combined Heat and Power (CHP) System
– Wide range of alternator and controller options

Cons:
– Higher initial cost compared to traditional diesel generators
– Dependence on gas supply infrastructure
– Potential complexity in maintenance due to the conversion technology

China HUAQUAN 360KW gas generator 450KVA natural …

Product Details: The natural gas generator sets from Shandong Huaquan Power Co., Ltd. are designed with high-speed motor-controlled gas control devices, offering fast transient response capabilities and optimized boost pressure control. These generators can be adapted for use in oil fields as the main power source for electric and mechanical drilling rigs. For example, the 100kw gas generator set has dimensions of 2300×750×1600 (L×W×H mm) and a unit weight of 1250kg, with a rated frequency of 50 Hz and a speed of 1500 rpm. The Weichai series gas engine is often used as the power source[1][2].

Pros:
– High-speed motor-controlled gas control device with fast transient response capa…
– Optimized boost pressure control for stability and quick response
– Adaptable to main power needs in oil fields for electric and mechanical drilling…
– Use of high-quality components such as pure copper alternators
– Efficient, energy-saving, and eco-friendly design

Cons:
– Requires demineralized water for high and low temperature cycles of the engine,…
– Cooling water must be slightly alkaline and free from corrosive compounds, addin…
– High unit weight and large dimensions may complicate transportation and installa…

Ettes Power Methane Gas Generator, Natural gas, biogas

Product Details: Ettes Power methane gas engine generators are designed to operate on various types of methane-based gases, including natural gas, biogas, landfill gas, sewage gas, and others. These generators are powered by renowned gas engines such as Cummins, Perkins, MWM-Deutz, CNPC 190, and Low Speed 300 series, coupled with alternators from Stamford, Leroy Somer, Siemens, or Marathon. The power range of these generators extends from 20kW to 2200kW. They are equipped with advanced technologies including mixer, ignition, and governor systems from Woodward, Heinzmann, Altronic, and IMPCO, ensuring stable and credible performance, ease of maintenance, and a long lifespan.

Pros:
– Abundant fuel supply: Methane gas is widely available from various sources.
– Cost-saving: Methane gas is a cost-effective alternative to conventional fuels l…
– Environmental benefits: Switching to methane gas reduces CO2 emissions by up to…
– High performance: Generators are equipped with advanced technologies for stable…
– Global market presence: Ettes Power generators are popular in over 70 countries…

Cons:
– Complex fuel types: While versatile, managing different types of methane-based g…
– Maintenance requirements: Although designed for ease of maintenance, regular upk…
– Initial investment: While cost-effective in the long run, the initial investment…

Comparison Table

Frequently Asked Questions (FAQs)

Frequently Asked Questions About Natural Gas Powered Generator Factories in China

What power ranges do natural gas generators from Chinese factories typically offer?

Natural gas generators from Chinese factories often cover a wide range of power outputs. You can find generators with power outputs starting from as low as 10 kW and going up to 5000 kW or even higher. For example, some manufacturers offer generators in the 300 kW to 5000 kW range, while others provide options from 40 kW to 3000 kW.

What types of gases can these generators use?

These generators are versatile and can use various types of gases. You can expect them to run on natural gas, biogas, coal bed methane, associated gas from oil fields, and even other combustible gases. This adaptability makes them suitable for different industrial and commercial applications.

What are the key features and technologies used in these generators?

Chinese natural gas generators often incorporate advanced technologies to enhance performance and efficiency. You’ll find features like electronic control systems, lean-burn combustion strategies, and air-fuel ratio control, which improve fuel economy, reliability, and safety. Additionally, many generators are designed for combined heat and power (CHP) or combined heat, power, and cooling (CHPC) solutions, maximizing energy utilization.

Where are these generators commonly used?

These generators are widely used in various sectors. You’ll find them in oil and gas fields, power stations, factories, engineering machinery, and even in landfill gas power plants. They are also used in remote areas for standby power and in mobile power stations.

What kind of certifications and standards do these generators meet?

Chinese natural gas generators typically meet international standards and certifications. You can expect them to comply with standards such as ISO 8528, ISO 3046, and national standards like GB2820. Many manufacturers also hold certifications like ISO 9001, ISO 14001, and OHSAS 18001, ensuring high quality and reliability.